Start typing and press Enter to search

According to the years of research and industry accumulation, BND successfully developed high quality ABM-series boron nitride coating.
The raw material, equipment and production technology for ABM are introduced from Europe and America, and we made the corresponding improvement based on large number of demonstrating experiment, which is more close to the users in their production process and using habits, using experience is greatly improved.
ABM has won the recognition and favor of customers for the advantages such as strong adhesion, good suspension, rapid demoulding, improving production efficiency and so on.

  • Aluminum extrusion release agent

    Aluminum extrusion release agent

    INTRODUCTION

    BAE-S30 is a water-based high-temperature release spray. All components of the product are completely water-soluble, and have very good lubricating effect and high-temperature stability. Used in the aluminum extrusion process, it can effectively prevent aluminum alloys at high temperatures. Adhesion with extrusion tools improves production efficiency without any pollution to aluminum products and the environment.

    SPECIFICATION

    Product superiority:
    1,The product uses water-based environmentally friendly materials without solvents.

    2,No smoke or fire during use.

    3,Good separation effect without damaging the substrate.

    4,Concentrated liquid, high ratio of water to water (1: 5 ~ 1: 6), saving cost.

    5,It is safe to use and the workshop is clean.

    BN Lubricant Rod

    BN Lubricant Rod

    INTRODUCTION

    BAE-15 aluminum extruded boron nitride solid lubricant is a white rod-like solid, It’s use imported high-purity boron nitride(Purity>99.7%)、 imported smokeless paraffin and other additives to manufacture . It has excellent high temperature stability and lubrication performance. Can be applied on extrusion pads,Ingot holder, pressure shear, etc. to effectively prevent aluminum alloy sticking. Extend the life of the extrusion pad, easy to use, shorten maintenance time, improve production efficiency and save costs. Less smoke, no hazardous ingredients, harmless to human health.

    SPECIFICATION


    Main content

    High-purity boron nitride, smokeless high-temperature wax, other additives, etc.

    Maximum use temperature

    about 480°C

    State

    white rod-like solid

    Viscosity

    about 750mPa﹒s

    Flash point

    ≥230°C

    Size

    Φ70mm*128mm(±2mm)

    Dropping Point

    About 120°C

    Density

    About 0.95g/cm3

  • ABM

    ABM

    INTRODUCTION

    ABM is a general type concentrate , which can be widely used in the production process of aluminum round bar, flat ingot, foil blank, wire rod, etc.,it can be painted on the surface of refractories and tools, with large dilution ratio and good performance.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3

    BN Content (%)

    23~25

    Solid content (%)

    30~32

    Viscosity (CPS)

    85~100mm2/s

    PH

    3.5~5

    Dilution rate

    1:4~1:5

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    15~20m2/L

    Packaged form

    6kg/bucket or 1 gallon

    ABM

    ABM

    INTRODUCTION

    ABM is a general type concentrate , which can be widely used in the production process of aluminum round bar, flat ingot, foil blank, wire rod, etc.,it can be painted on the surface of refractories and tools, with large dilution ratio and good performance.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3

    BN Content (%)

    23~25

    Solid content (%)

    30~32

    Viscosity (CPS)

    85~100mm2/s

    PH

    3.5~5

    Dilution rate

    1:4~1:5

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    15~20m2/L

    Packaged form

    6kg/bucket or 1 gallon



  • ABM-S

    ABM-S

    INTRODUCTION

    ABM-S is specially developed for the melting and casting process of aerospace ,electronic 3c ,military products and other sophisticated products .It is suitable for customers with high melt quality requirements.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3

    BN Content (%)

    26~28

    Solid content (%)

    33~35

    Viscosity (CPS)

    90~110mm2/s

    PH

    3.5~5

    Dilution rate

    1:4~1:6

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    18~25m2/L

    Packaged form

    6kg/bucket or 1gallon

    ABM-S

    ABM-S

    INTRODUCTION

    ABM-S is specially developed for the melting and casting process of aerospace ,electronic 3c ,military products and other sophisticated products .It is suitable for customers with high melt quality requirements.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3

    BN Content (%)

    26~28

    Solid content (%)

    33~35

    Viscosity (CPS)

    90~110mm2/s

    PH

    3.5~5

    Dilution rate

    1:4~1:6

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    18~25m2/L

    Packaged form

    6kg/bucket or 1gallon



  • ABM-i

    ABM-i

    INTRODUCTION

    ABM-i is an improved version of ABM,which different adhesives and other auxiliaries are added,and has good compatibility with refractories of different materials.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3/SiO2

    BN Content (%)

    21~22

    Solid content (%)

    27~28

    Viscosity (CPS)

    75~95mm2/s

    PH

    3.5~5

    Dilution rate

    About 1:4

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    12~18m2/L

    Packaged form

    6kg/bucket or 1 gallon

    ABM-GS

    ABM-GS

    INTRODUCTION

    ABM-GS is widely used in the melting and casting process of general aluminum industrial materials production .It has good suspension ,bright coating,strong universality and cost - effective.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3/SiO2

    BN Content (%)

    17~19

    Solid content (%)

    23~25

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5

    Dilution rate

    1:3~1:4

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    10~15m2/L

    Packaged form

    5kg/bucket or  6kg/bucket

  • ABM-Di

    ABM-Di

    INTRODUCTION

    ABM-Di is a basic concentrate with good quality and low price .It is well - used in many fields such as aluminum processing,casting and coating of refractory tooling.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    BN

    Carrier

    H2O

    Color

    White/Blue

    Binder

    Al2O3/SiO2

    BN Content (%)

    16~17

    Solid content (%)

    22~23

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5

    Dilution rate

    About 1:3

    Maximum

    service temperature

    1000℃

    in aerobic environment

    Covering power

    8~12m2/L

    Packaged form

    6kg/bucket or 1 gallon

    BRC

    BRC

    INTRODUCTION

    BRC refractory clay is used as piling and repairing refractory materials ,which is widely used for the maintenance and repair of aluminum casting die plates,flow channels,box bodies,water ports and other parts.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Main component

    Al2O3

    About 55%

    SiO2

    About 45%

    Heat conductivity

    (λW/mK)

    200℃

    0.16

    400℃

    0.20

    650℃

    0.24

    Density

    Wet: 1700kg/m3

    Dry: 900kg/m3

    Maximum

    service temperature

    1800℃

    Packing: 5kg/bucket

  • GHB-20

    GHB-20

    INTRODUCTION

    Ghb-20 is an energy saving, environmental protective, efficient filter box preheating equipment.Core parts and components are imported from Germany,with reliable quality.One-key control,easy to operate.Low energy consumption,the single preheating process gas consumption is about 4-5m3.Equipped With multiple safety protection measures such as gas pressure monitoring, air pressure monitoring, flame monitoring, ignition monitoring, gas chamber pressure monitoring etc..High heating efficiency,the rotating blue flame length is about 10cm, and the filter is heated through the uniform hot air circulation. A 23-inch double-slot and double-stage filter box will be heated to 700℃ for about 30 minutes.Thorough preheating , the temperature of the lower surface of the filter can reach more than 550℃ within the specified heating time (generally less than 30 minutes), and the temperature difference between the upper and lower surface of the filter will not exceed 200℃, ensuring the effective filtration area of the filter and sufficient supply of casting molten aluminum.For the existing filter boxes in some factories, we can directly install burners on the filter boxes, which is convenient and fast, and greatly saves the time and cost of Equipment reform.

    SPECIFICATION

    Voltage

    220V

    Equipment power

    About 500W

    Gas pressure

    80~100mbar

    Compressed air pressure

    ≤6bar

    Heating power

    About 50KW

    Gas consumption 

    About 7~8m3/hour

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5


    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com

    GHB-20

    GHB-20

    INTRODUCTION

    Ghb-20 is an energy saving, environmental protective, efficient filter box preheating equipment.Core parts and components are imported from Germany,with reliable quality.One-key control,easy to operate.Low energy consumption,the single preheating process gas consumption is about 4-5m3.Equipped With multiple safety protection measures such as gas pressure monitoring, air pressure monitoring, flame monitoring, ignition monitoring, gas chamber pressure monitoring etc..High heating efficiency,the rotating blue flame length is about 10cm, and the filter is heated through the uniform hot air circulation. A 23-inch double-slot and double-stage filter box will be heated to 700℃ for about 30 minutes.Thorough preheating , the temperature of the lower surface of the filter can reach more than 550℃ within the specified heating time (generally less than 30 minutes), and the temperature difference between the upper and lower surface of the filter will not exceed 200℃, ensuring the effective filtration area of the filter and sufficient supply of casting molten aluminum.For the existing filter boxes in some factories, we can directly install burners on the filter boxes, which is convenient and fast, and greatly saves the time and cost of Equipment reform.

    SPECIFICATION

    Voltage

    220V

    Equipment power

    About 500W

    Gas pressure

    80~100mbar

    Compressed air pressure

    ≤6bar

    Heating power

    About 50KW

    Gas consumption 

    About 7~8m3/hour

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5


    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com
  • GHB-20

    GHB-20

    INTRODUCTION

    Ghb-20 is an energy saving, environmental protective, efficient filter box preheating equipment.Core parts and components are imported from Germany,with reliable quality.One-key control,easy to operate.Low energy consumption,the single preheating process gas consumption is about 4-5m3.Equipped With multiple safety protection measures such as gas pressure monitoring, air pressure monitoring, flame monitoring, ignition monitoring, gas chamber pressure monitoring etc..High heating efficiency,the rotating blue flame length is about 10cm, and the filter is heated through the uniform hot air circulation. A 23-inch double-slot and double-stage filter box will be heated to 700℃ for about 30 minutes.Thorough preheating , the temperature of the lower surface of the filter can reach more than 550℃ within the specified heating time (generally less than 30 minutes), and the temperature difference between the upper and lower surface of the filter will not exceed 200℃, ensuring the effective filtration area of the filter and sufficient supply of casting molten aluminum.For the existing filter boxes in some factories, we can directly install burners on the filter boxes, which is convenient and fast, and greatly saves the time and cost of Equipment reform.

    SPECIFICATION

    Voltage

    220V

    Equipment power

    About 500W

    Gas pressure

    80~100mbar

    Compressed air pressure

    ≤6bar

    Heating power

    About 50KW

    Gas consumption 

    About 7~8m3/hour

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5


    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com

    BQF-2

    BQF-2

    INTRODUCTION

    BQF-2 is mainly used to remove non-metallic oxides, sodium, calcium and other alkali metals in the smelting process of aluminum and aluminum alloy, and reduce the content of harmful substances to obtain higher performance of aluminum alloy melt.

    Contact us:
    Contact:15820480351 Maggie Zhao
    Mail:Shenzhen.boronide@gmail.com

    SPECIFICATION

    Product superiority:
    Low calorific value, adding temperature is above 650℃.
    Reaction fumes reduced.
    Dross poor in Al.
    Temperature homogenizing.Walls cleaning side effect.
    Cleaner launders and downstream equipment.
    Improved CFF efficiency, potential to use finer porosity, since the cleanliness is improved.
    Oxides, Sodium and Calcium reduced to few ppm.
    Packing:25 kg bags
  • Filter bag

    Filter bag

    INTRODUCTION

    Filter bag and shunt bag
    Our filter bag and split-flow bag filter fiber are specially designed and woven by special high silicon and high strength glass fiber woven aluminum liquid filter net,and dense and high strength outer lining, which are treated by special high-temperature resistant coating.High twist yarns are used to control the yarn diameter, while preventing flattening or deformation caused by the pressure caused by contact with the aluminum solution, and organic resin or ceramic coating is used to maintain the integrity of the woven pattern.

    SPECIFICATION

    Product advantages:
    Easy installation, reduce turbulence, improve metal distribution, reduce waste products, effectively remove oxides.The fiber has been treated with ceramic coating, and only produces slight gas and less smoke when it contacts with aluminum water, which is safe and environmentally friendly.Suitable for longer castings, alloys with strong erodibility, higher temperature range and higher strength requirements.

    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com

    shunt bag

    shunt bag

    INTRODUCTION

    Filter bag and shunt bag
    Our filter bag and split-flow bag filter fiber are specially designed and woven by special high silicon and high strength glass fiber woven aluminum liquid filter net,and dense and high strength outer lining, which are treated by special high-temperature resistant coating.High twist yarns are used to control the yarn diameter, while preventing flattening or deformation caused by the pressure caused by contact with the aluminum solution, and organic resin or ceramic coating is used to maintain the integrity of the woven pattern.

    SPECIFICATION

    Product advantages:
    Easy installation, reduce turbulence, improve metal distribution, reduce waste products, effectively remove oxides.The fiber has been treated with ceramic coating, and only produces slight gas and less smoke when it contacts with aluminum water, which is safe and environmentally friendly.Suitable for longer castings, alloys with strong erodibility, higher temperature range and higher strength requirements.

    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com