Start typing and press Enter to search

According to the years of research and industry accumulation, BND successfully developed high quality ABM-series boron nitride coating.
The raw material, equipment and production technology for ABM are introduced from Europe and America, and we made the corresponding improvement based on large number of demonstrating experiment, which is more close to the users in their production process and using habits, using experience is greatly improved.
ABM has won the recognition and favor of customers for the advantages such as strong adhesion, good suspension, rapid demoulding, improving production efficiency and so on.

  • GHB-20

    GHB-20

    INTRODUCTION

    Ghb-20 is an energy saving, environmental protective, efficient filter box preheating equipment.Core parts and components are imported from Germany,with reliable quality.One-key control,easy to operate.Low energy consumption,the single preheating process gas consumption is about 4-5m3.Equipped With multiple safety protection measures such as gas pressure monitoring, air pressure monitoring, flame monitoring, ignition monitoring, gas chamber pressure monitoring etc..High heating efficiency,the rotating blue flame length is about 10cm, and the filter is heated through the uniform hot air circulation. A 23-inch double-slot and double-stage filter box will be heated to 700℃ for about 30 minutes.Thorough preheating , the temperature of the lower surface of the filter can reach more than 550℃ within the specified heating time (generally less than 30 minutes), and the temperature difference between the upper and lower surface of the filter will not exceed 200℃, ensuring the effective filtration area of the filter and sufficient supply of casting molten aluminum.For the existing filter boxes in some factories, we can directly install burners on the filter boxes, which is convenient and fast, and greatly saves the time and cost of Equipment reform.

    SPECIFICATION

    Voltage

    220V

    Equipment power

    About 500W

    Gas pressure

    80~100mbar

    Compressed air pressure

    ≤6bar

    Heating power

    About 50KW

    Gas consumption 

    About 7~8m3/hour

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5


    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com

    GHB-20

    GHB-20

    INTRODUCTION

    Ghb-20 is an energy saving, environmental protective, efficient filter box preheating equipment.Core parts and components are imported from Germany,with reliable quality.One-key control,easy to operate.Low energy consumption,the single preheating process gas consumption is about 4-5m3.Equipped With multiple safety protection measures such as gas pressure monitoring, air pressure monitoring, flame monitoring, ignition monitoring, gas chamber pressure monitoring etc..High heating efficiency,the rotating blue flame length is about 10cm, and the filter is heated through the uniform hot air circulation. A 23-inch double-slot and double-stage filter box will be heated to 700℃ for about 30 minutes.Thorough preheating , the temperature of the lower surface of the filter can reach more than 550℃ within the specified heating time (generally less than 30 minutes), and the temperature difference between the upper and lower surface of the filter will not exceed 200℃, ensuring the effective filtration area of the filter and sufficient supply of casting molten aluminum.For the existing filter boxes in some factories, we can directly install burners on the filter boxes, which is convenient and fast, and greatly saves the time and cost of Equipment reform.

    SPECIFICATION

    Voltage

    220V

    Equipment power

    About 500W

    Gas pressure

    80~100mbar

    Compressed air pressure

    ≤6bar

    Heating power

    About 50KW

    Gas consumption 

    About 7~8m3/hour

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5


    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com
  • GHB-20

    GHB-20

    INTRODUCTION

    Ghb-20 is an energy saving, environmental protective, efficient filter box preheating equipment.Core parts and components are imported from Germany,with reliable quality.One-key control,easy to operate.Low energy consumption,the single preheating process gas consumption is about 4-5m3.Equipped With multiple safety protection measures such as gas pressure monitoring, air pressure monitoring, flame monitoring, ignition monitoring, gas chamber pressure monitoring etc..High heating efficiency,the rotating blue flame length is about 10cm, and the filter is heated through the uniform hot air circulation. A 23-inch double-slot and double-stage filter box will be heated to 700℃ for about 30 minutes.Thorough preheating , the temperature of the lower surface of the filter can reach more than 550℃ within the specified heating time (generally less than 30 minutes), and the temperature difference between the upper and lower surface of the filter will not exceed 200℃, ensuring the effective filtration area of the filter and sufficient supply of casting molten aluminum.For the existing filter boxes in some factories, we can directly install burners on the filter boxes, which is convenient and fast, and greatly saves the time and cost of Equipment reform.

    SPECIFICATION

    Voltage

    220V

    Equipment power

    About 500W

    Gas pressure

    80~100mbar

    Compressed air pressure

    ≤6bar

    Heating power

    About 50KW

    Gas consumption 

    About 7~8m3/hour

    Viscosity (CPS)

    65~90mm2/s

    PH

    3~5


    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com

    Filter bag

    Filter bag

    INTRODUCTION

    Filter bag and shunt bag
    Our filter bag and split-flow bag filter fiber are specially designed and woven by special high silicon and high strength glass fiber woven aluminum liquid filter net,and dense and high strength outer lining, which are treated by special high-temperature resistant coating.High twist yarns are used to control the yarn diameter, while preventing flattening or deformation caused by the pressure caused by contact with the aluminum solution, and organic resin or ceramic coating is used to maintain the integrity of the woven pattern.

    SPECIFICATION

    Product advantages:
    Easy installation, reduce turbulence, improve metal distribution, reduce waste products, effectively remove oxides.The fiber has been treated with ceramic coating, and only produces slight gas and less smoke when it contacts with aluminum water, which is safe and environmentally friendly.Suitable for longer castings, alloys with strong erodibility, higher temperature range and higher strength requirements.

    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com

  • shunt bag

    shunt bag

    INTRODUCTION

    Filter bag and shunt bag
    Our filter bag and split-flow bag filter fiber are specially designed and woven by special high silicon and high strength glass fiber woven aluminum liquid filter net,and dense and high strength outer lining, which are treated by special high-temperature resistant coating.High twist yarns are used to control the yarn diameter, while preventing flattening or deformation caused by the pressure caused by contact with the aluminum solution, and organic resin or ceramic coating is used to maintain the integrity of the woven pattern.

    SPECIFICATION

    Product advantages:
    Easy installation, reduce turbulence, improve metal distribution, reduce waste products, effectively remove oxides.The fiber has been treated with ceramic coating, and only produces slight gas and less smoke when it contacts with aluminum water, which is safe and environmentally friendly.Suitable for longer castings, alloys with strong erodibility, higher temperature range and higher strength requirements.

    Contact us:
    Contact:15820480351 Maggie Zhao 
    Mail:Shenzhen.boronide@gmail.com